• SZ 4140.010 RITTAL Cabinet Compact Light

    RITTAL SZ 4140.010

    Cabinet Compact Light

    Product description
    Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
    conventional lights
    Faster: Universal quick-release fastening at TS punchings using clips, screws or
    powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
    Door-operated switch connection can be made using 2-pole connector
    Transparent light cover, fluted on inside
    Color: Similar to RAL 7035
    Protection category
    IP to IEC 60 529:
    IP 20
    Supply includes: Compact light with clip and screw mounting kits
    Light (bulb)
    Light cover
    Connection cable
    Assembly components
    Note: Door-operated switch connection can be made using 2-pole connector
    Note on Model No.:: Cable deflector across rear possible
    Product features
    Dimensions: Height: 59 mm (2.3 “)
    Width: 455 mm (18 “)
    Depth: 24 mm (0.94 “)
    Rated operating
    voltage:
    100 V – 240 V, 1~, 50 Hz/60 Hz
    Voltage tolerance: ± 10 %
    © Rittal 2020 1
    Installation options: TS horizontal profile from roof frames: direct
    TS, SE vertical profile, direct
    SE profiles to the front and rear of roof frames: direct
    SE profiles to the side of roof frames: direct
    AE, CM, TP: with magnet mounting kit
    AE: with rail for interior installation
    Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
    Mounting distance – screw attachment: 475 mm (19 “)
    Operating
    temperature:
    Operation (environment): -15 °C…+45 °C
    Storage: -20 °C…+70 °C
    Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
    For 110 V/60 Hz: 0,083 A – 0,149 A
    Power consumption: 8 W
    Equipment
    (electrical):
    Ballast: Wide range voltage EB
    Light (bulb): T5 fluorescent lamp
    Length of connection cable: 3 m (118 “)
    Cable color: Yellow
    Switch (type): Integral, on/off/door-operated switch mode
    Rated insulation
    voltage:
    500 V DC/1s
    Rated impulse
    withstand voltage,
    phase to earth:
    1000 V AC
    Rated impulse
    withstand voltage,
    phase to phase:
    500 V AC
    Protection category: II (total insulation)
    Connection options: Integrated connection cable with open end
    Door-operated switch
    Light – installation
    type:
    Screw fastening
    Clip fastening
    Magnetic fastener (accessories)
    Cable deflector
    across rear possible:
    yes

  • 4155110 RITTAL Cabinet Universal Light with Socket

    RITTAL 4155110

    Technical
    Description Compact fluorescent tube 18 W with high luminosity.
    Benefits Simple, fast assembly
    Installation options TS horizontal section of the roof frame: direct
    TS, SE vertical section: with TS adaptor bracket
    SE sections at the front and rear of the roof frame: with TS adaptor bracket
    SE extrusions at the side of the roof frame: direct
    AE, CM, TP: with universal bracket
    AE: with rail for interior installation
    Material Plastic
    Supply includes Universal light
    Integral motion detector
    Light
    Light cover
    Assembly parts
    Dimensions Width: 345 mm
    Height: 95 mm
    Depth: 55 mm
    Rated operating voltage 110 V – 240 V, 1~, 50 Hz/60 Hz
    Equipment (electrical) Ballast: Wide-range electronic ballast
    Light: Compact fluorescent lamp, base 2G11
    Jack/socket (type): D, earthing-pin (type F, CEE 7/3)
    Integral motion detector: yes
    Switch (type): Integral, on/off/motion detector mode
    Operating temperature Operation (environment): -15°C…+45°C
    Bearing: -20°C…+70°C
    Power consumption 18 W
    Rated insulation voltage 250 V AC
    Rated impulse withstand voltage, phase
    to phase
    2500 V AC
    Protection category I (PE conductor)
    Light – installation type Screw-fastening
    Connection options Power supply via connectors
    Through-wiring (creating rows of lights)
    Light cover yes

  • PUNDUIT NUL6X04WH-HEG

    PUNDUIT NUL6X04WH-HEG

     

    Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
    1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft

  • NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor

    NKFD1W12BUDLCZ PANDUIT

    DESCRIPTION

    Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.

  • NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor

    NKFD1W12BUDLCZ PANDUIT

    24port LC Duplex (48port) Patch Panel with Adaptor

    DESCRIPTION

    • Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
    • Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
    • Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
    • Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
    • Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
    • Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability

     

  • 8108235 RITTAL TS SIDE PANELS 2000 x 800 RAL7035

    RITTAL 8108235

    TS SIDE PANELS 2000 x 800 RAL7035

    Product description
    Benefits: Automatic potential equalization and higher EMC protection thanks to enclosure panel
    holders with grounding insert
    Easy positioning with the location aid
    Grounding bolt with contact surface

    Enclosure type: TS IT
    Height: 2000 mm (79 ˝)
    Depth: 800 mm (31 ˝)
    Packaging unit: 2 pc(s

  • DK  5502.020 RITTAL Fan Mounting Plates Including Thermostat

    RITTAL DK  5502.020
    Fan mounting plates including thermostat

    Product description
    Description: For active ventilation of the TS IT. For use in the cut-out integrated into the roof plate. The unit
    may optionally be extended with additional fans.
    Applications: For active ventilation.
    Colour: RAL 7035
    Supply includes: Fan unit
    2 fans
    1 thermostat
    Open connection cable
    Assembly parts
    Note: For use in the cut-out integrated into the roof plate.
    Connection via distributor box or country-specific connector.
    Packs of: 1 pc(s).
    EAN: 4028177679252
    Customs tariff
    number:84145100
    Product features
    Rated operating voltage:250 V
    Dimensions: Width: 340 mm
    Height: 54 mm
    Depth: 550 mm

  • DK 5501.040 RITTAL Cabinet Side Panels

    RITTAL DK 5501.040

    Side panels, divided with lockable quick-release fastener
    Product description
    Benefits:Easy to use
    Tool-free assembly
    Quick-release fastener including security lock 3524 E.
    Internal latch included (no key required)
    Lock with chassis, cable clamp rail may be top-mounted on the outer mounting level.
    Applications:
    Suitable for IT climate control and rack extinguishing.
    Material:
    Sheet steel
    Surface finish:
    Spray-finished
    Colour:
    RAL 7035
    Supply includes:
    Console
    Pedestal
    Earth conductor
    Assembly parts
    Packs of:
    1 pc(s).
    EAN:
    4028177678736

  • 2500310 RITTAL LED System Light

     RITTAL 2500310

    LED System Light

    Description:

    LED system light – the first light especially for enclosures! Highly innovative LED
    technology for even more light into the very last corner.
    Benefits: Optimum illumination of the entire enclosure
    Optionally with clip, screw and magnetic attachment
    A configuration to suit every application Dimensions: Width: 437 mm
    Height: 85 mm
    Depth: 44 mm

     

  • 8100235 RITTAL TS SIDE PANELS 2000X1000 RAL7035.SCRW FX

    RITTAL 8100235

    TS SIDE PANELS 2000X1000 RAL7035.SCRW FX

    Technical

    Supply includes Assembly parts
    To fit TS
    TS IT
    Height: 2000 mm
    Depth: 1000 mm
    Packs of 2 pc(s).
    Weight/pack 48 kg

  • SR 2340.700 RITTAL Pivoting Frame, Large, Without Trim Panel for TS, SE, 600 mm and 1200 mm Wide Enclosures

    RITTAL SR 2340.700

    Pivoting Frame, large, without trim panel for TS, SE,600 mm and 1200 mm wide enclosures

    Product description
    Description: To mount 482.6 mm (19″) equipment.
    Material: Carbon steel
    Surface finish: Zinc-plated
    Mounting tip: Depending on the installation situation TS punched sections with mounting flange, 23 x 73 mm,
    or TS punched sections with mounting flange, 17 x 73 mm are required
    Supply includes: Cam with double-bit lock insert
    Parts for attaching to the installation kit

  • 3139100 RITTAL Roof-Mounted Fan, Roof Vent

     RITTAL  3139100

    Roof-Mounted Fan, Roof Vent

    Description:

    Roof-mounted fan with a high protection category and flexible installation from the inside
    or outside.

Main Menu