-
SCSPPU24UTP Opterna 19” Modular UTP patch panel, 24 ports, 1U, without modules, with rear cable management
SCSPPU24UTP Opterna
DESCRIPTION
Opterna snap-in type UTP keystone patch panel are designed for customized connectors. Based on the installers specific design requirements, connector can be snapped into the panel. The UTP keystone patch panels are compatible for use with the category 5e and 6 keystone jacks and come as an unloaded panel. The patch panel is constructed of high quality plastic and metal back plate to provide the maximum strength and durability. The UTP keystone patch panel has an integrated rear cable management feature for cable routing and strain relief requirements. The rear cable management easily mounts at the back of the panel. The patch panel has an integrated label identification slot which allows the installer to design labels based on the project requirement making the panel TIA 606 compliant.
Applications
• Standard 19” rack compatible
• Suitable for UTP keystone jacks
• Height: 1U (24 ports), 2U (48 ports)Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class D/E
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 15.25 -
SCSUTP4C6PEBK Opterna Cat6 Solid 23AWG UTP PE 4Pair Outdoor Cable 305m/Reel Black
SCSUTP4C6PEBK Opterna
DESCRIPTION
Opterna 4-pair unshielded category 6 solid cables (U/UTP) has been designed for outdoor applications and is suitable for outdoor duct installations. The cable supports 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, Security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a UV stabilized polyethylene (PE) weather resistant jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit. The four pairs are wrapped with an overall polyester tape for extra protection.
Applications
• Outdoor Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC 61156-5
• CENELEC EN 50173-1:2011
• EN50288-6-1$ 171.53 -
SCSUTP4C6LSZHGN Opterna Cat6 Solid 23AWG UTP LSZH 4Pair Cable 305m/Box – Green
SCSUTP4C6LSZHGN Opterna
DESCRIPTION
Opterna 4 pair unshielded category 6 solid cables (U/UTP) has been designed for indoor applications and suitable for flawless 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a PVC/LSZH jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• UL 444
• TIA/EIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC61156-5
• CENELEC EN 50173-1:2011
• EN50288-5-1
• IEC 60603-7-2$ 148.66 -
SCSUTP4C6PVCGY Opterna Cat6 Solid 23AWG UTP PVC 4Pair Cable 305mtr/Box Grey
SCSUTP4C6PVCGY Opterna
DESCRIPTION
Opterna 4 pair unshielded category 6 solid cables (U/UTP) has been designed for indoor applications and suitable for flawless 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a PVC/LSZH jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• UL 444
• TIA/EIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC61156-5
• CENELEC EN 50173-1:2011
• EN50288-5-1
• IEC 60603-7-2$ 137.22 -
418019 DATWYLER Patch Panel 19‘‘1U , for 24x RJ45 Keystone Module, Black (Without Modules)
DATWYLER 418019
Patch Panel 19‘‘1U , for 24x RJ45 Keystone Module, Black (Without Modules)
DESCRIPTION
Shielded 19”/1U patch panel for up to 24 modules with Keystone fitting.
Snap-in modules can be easily fitted into the patch panel.
Unused ports can be covered with blank covers.
For the modules PS-GG45 7A Datwyler recommends the patch panel MGK 24x.DIMENSIONS
Width 482 mm (19‘‘)
Depth 160 mm (including cable strain relief)
Height 44 mm (1U)$ 22.33 -
240642 DATWYLER Faceplate Angle, 2-Ports with Keystone Fitting – BS
DATWYLER 240642
Faceplate Angle, 2-Ports with Keystone Fitting – BS
DESCRIPTION
Applicable for the installation of 1 respectively 2 modules with Keystone fitting (shielded or unshielded)
or 1 respectively 2 LC Duplex or SC Simplex adapters.
The Keystone modules and FO adapters are easily fitted into the faceplates.
The universal module frame can be swapped or replaced from the front side.
Integrated sliding dust shutters (removable) serve as covers for unused ports (available in white, blue, yellow or red).
2 label areas: 1 in module frame (with transparent label cover), 1 on face plate cover.
Supplied with labelling strips.
Delivery without Keystone modules / FO adapters.$ 3.27 -
240562 DATWYLER Cat6 U/UTP AWG23 PVC, Grey 305 mtr
DATWYLER 240562
Cat6 U/UTP AWG23 PVC, Grey 305 mtr
DESCRIPTION
Data cable for structured premesis cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class E applications (250 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Applicable for Power over Ethernet (PoE) / PoE+.$ 181.06 -
418022 DATWYLER Patch Panel 19‘‘ 1U , for 24x RJ45 KS Module UTP, Black (Without Modules)
DATWYLER 418022
Patch Panel 19‘‘ 1U , for 24x RJ45 KS module UTP, Black (Without Modules)
DESCRIPTION
Unshielded 19“/1U patch panel for up to 24 RJ45 Keystone modules KU-TC Plus / KU-T 1/8, unshielded, in accordance with Cat.6A, Cat.6 or Cat.5e.
Snap-in modules can be easily fitted into the patch panel.
Unused ports can be covered with blank covers.$ 19.60 -
418070 DATWYLER RJ45 Module KU-T 1/8 Tool-less, Cat. 6, Unshielded
DATWYLER 418070
RJ45 Module KU-T 1/8 Tool-less, Cat. 6, Unshielded
DESCRIPTION
For the transmission of digital and analogue voice, video and data signals.
Suitable for all Class D applications respectively Class E Channels in accordance with ISO/IEC 11801, EN 50173-1 and TIA/EIA 568-B.2-10. Housing made of high-impact resistant,
flame retardant compound, UL94V-0 rated, with Keystone mounting clip.
Contact spring with phosphor bronze alloy, plated with gold.
IDC made of phosphor bronze alloy. Information:
Suitable for the same faceplates and surface mount boxes as Datwyler’s shielded Keystone modules (KS-T).
MECHANICAL PROPERTIES
Solid copper wire 0.40 mm (AWG 26) to 0.65 mm (AWG 22)
Re-connection for AWG 22, AWG 23 and AWG 24
when using the same or bigger wire diameter
Stranded copper wire AWG 26 (with 7 bare stranded wires), re-usable once
Diameter over insulation 0.70 mm to 1.40 mm (1.60 mm)
Temperature range storing: – 40° C to + 70° C
during installation: – 10° C to + 60° C
in operation: – 20° C to + 60° C$ 3.27 -
CU 6502 4P DATWYLER Data Cable, U/FTP, Category 6A, AWG23
DATWYLER CU 6502 4P
Data cable, U/FTP, Category 6A, AWG23, Euroclass DcaDESCRIPTION
Electrically and mechanically improved quality Cat.6A data cable – fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and prEN 50288-10-1.
Good shielding effect due to individually screened pairs.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
APPLICATION
Data cable for structured premises cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class EA applications (500 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Applicable for Power over Ethernet (PoE) / PoE+.
Supported Applications: 10Base-T, 100Base-T, 1000Base-T, 2.5GBase-T, 5GBase-T, 10GBase-T, Fieldbus$ 432.63 -
653508 DATWYLER RJ45 1M Patch Cords Cat.6A
DATWYLER 653508
RJ45 patch cords Cat.6A (IEC) 500 MHz
Description
Shielded patch cords and connection cables with shielded RJ45 plug on both ends, fitted with an
overmoulding and an anti-snag boot in the same colour as the cable sheath and with latch protection.
The cable CU 7702 flex 4P (Cat.7) offers excellent Next and impedance values due to the individually
foil screened pairs (PiMF).
Due to the overall copper braid, the patch cables have an excellent screen performance and are
highly flexible. They are optimized for the transmission of CATV signals up to 862 MHz.
The pach cords meet all the requirements of Category 6A (IEC) and the limit values stipulated for
Class EA cabling links (Channels) for 10GBase-T applications.
Standard assortment: from 0.5 m up to 20 m.
Customised adjustments (anti-snag boot, termination, label) are available at short notice.$ 7.90 -
DSCU02003AR OPTERNA Copper Structured Cabling, Cable, CAT6 U/UTP
OPTERNA DSCU02003AR
Copper Structured Cabling, Cable, CAT6 U/UTP
• Category 6A/class EA compliant
• Low flame-spread LSFH jacket material
• Compliant to ISO/IEC 11801 Ed 2.0, ANSI/TIA-
568-C.2, EN 50173-1,
• IEC 61156-5, EN 50288-10-1, IEC 60332-3-24,
IEC 60754-2, IEC 61034
• Reliable performance
• Super-standard performance marginApplications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signalling$ 149.75