-
N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
N116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 7.02 -
N11A.U1F010OK Nexans LANmark-6A Ultim UniBoot Patch Cords, 1 mtrs
N11A.U1F010OK Nexans
DESCRIPTION
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.$ 7.08$ 7.62 -
CPCSSZ2-03F003 COMMSCOPE Cat6a Modular Patch Cord, 3FT
COMMSCOPE CPCSSZ2-03F003
Cat6a Modular Patch Cord, 3FT
DESCRIPTION
ANSI/TIA Category 6A
Cable Type U/UTP (unshielded)
Conductor Type Solid$ 7.08 -
CPC3392-03F007 COMMSCOPE Cat6 Modular Patch Cord,7FT
COMMSCOPE CPC3392-03F007
Cat6 Modular Patch Cord,7FT
DESCRIPTION
ANSI/TIA Category 6
Cable Type U/UTP (unshielded)
Conductor Type Stranded
Jacket Color Dark gray
Pairs, quantity 4$ 7.35 -
CPC3392-03F010 COMMSCOPE Patch Cord
COMMSCOPE CPC3392-03F010 Patch Cord
General Specifications
ANSI/TIA Category 6
Cable Type U/UTP (unshielded)
Conductor Type Stranded
Interface, Connector A RJ45 plug$ 7.90 -
SCSPCC6AUTP03MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 3mtr Grey
SCSPCC6AUTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 7.90 -
700004815 COMMSCOPE SC Duplex Adapter, Blue
COMMSCOPE 700004815 SFA-SC02-BL
TeraSPEED® SC Duplex Adapter, Blue, Single Pack
General Specifications
Interface SC
Body Style Duplex
Interface Feature Standard
Color Blue
Mount Type Flange
Package Quantity 1
Product Type Adapter
Shuttered No
Total Ports, quantity 2
Transmission Standards TIA/EIA568B.
3 | TIA/EIA604
FOCIS3$ 8.12$ 9.02700004815 COMMSCOPE SC Duplex Adapter, Blue
$ 8.12$ 9.02 -
N205.624 Nexans Adapter DSC-DSC Single mode
Nexans N205.624
LANmark-OF Snap-in Adapter DSC-DSC Single mode
Description
LANmark-OF snap-in adapters have been designed for snapping into the
modular OF patch panels and ZD boxes. They are available in single SC,
dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector
types offer double density, as two fiber connections are offered on the SCtype
footprint. Installation time is saved as the snap-in concept replaces
the time-consuming screwing attachment of coupling devices.
Materials
· Adapter Housing: PBT, 15% Glass
· Sleeve Holder: PBT, 20% Glass
· Dust Cap: PP
· Spring:SUS 304 CSP 3/4 H
· PB Sleeve: PB – inner diameter 2,48mm – length 11.4mm
· Zirconia Sleeve: ZA Ceramic – inner diam.: 2.48mm -length11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)$ 8.17 -
N205.624 Nexans LANmark-OF Duplex SC Snap-In Adaptor Singlemode
N205.624 Nexans
DESCRIPTION
LANmark-OF Snap-In adapters have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
$ 8.20 -
N11A.U1F020OK Nexans LANmark-6A Ultim Patch Cord, 2 Meters
N11A.U1F020OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application. LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. Ultim cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points. They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A cabling channels. Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.$ 8.44$ 9.26 -
700206725 COMMSCOPE GigaSPEED XL® MGS400 Series Category 6 U/UTP Information Outlet, white
COMMSCOPE 700206725
GigaSPEED XL® MGS400 Series Category 6 U/UTP Information Outlet, white
General Specifications
ANSI/TIA Category 6
Cable Type Unshielded
Color WhiteCompatible Conductor Gauge, stranded 22 AWG | 24 AWG
$ 8.44 -
700211121 COMMSCOPE Non-Armored 48 Fiber Indoor Cable
COMMSCOPE 700211121 N-048-DS-5L-FMUAQ/C
LazrSPEED® Low Smoke Zero Halogen Riser Distribution Cable, 48 fiber multi-unit with 12 fiber subunits
Product Type Fiber indoor cable
General Specifications
Cable Type Distribution
Construction Type Non-armored
Fiber Type, quantity 48
Fibers per Subunit, quantity 12
Jacket Color Aqua
Subunit Type Gel-free
Subunit, quantity 4Total Fiber Count 48
Dimensions
Buffer Tube/Subunit Diameter 6.07 mm | 0.239 in
Diameter Over Jacket 16.19 mm | 0.637 in$ 9.03$ 10.03700211121 COMMSCOPE Non-Armored 48 Fiber Indoor Cable
$ 9.03$ 10.03
