-
TS 8601.085 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth Components, Front and Rear
RITTAL TS 8601.085
Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly componentsDimensions: Height: 100 mm (3.9 ˝)
Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)$ 36.60 -
3239200 RITTAL Outlet Filter Standard
RITTAL 3239200
Outlet Filter Standard
Description
For ventilation by convection, an outlet filter can be installed in the upper and lower sections
of the enclosure.Dimensions Width: 204 mm
Height: 204 mm
Depth: 24 mm
Required mounting cut-out Width: 177 mm
Height: 177 mm$ 34.03 -
N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04 -
3239.200 RITTAL Cabinet Climate Control Accessories
RITTAL 3239.200
Cabinet Climate Control Accessories
Outlet filter
For ventilation by convection, an outlet filter can
be installed in the upper and lower sections of the
enclosure.
Material:
ABS, material resistance to UL 94-V0
Color:
RAL 7035
Configuration:
− Outlet filter
− Filter mat
Accessories:
− Spare filter mats, see page 483
− Fine filter mats, see page 484
Dimensions
H x W x D inches (mm)
Part No.
Standard EMC
5 x 5 x .6 (116.5 x 116.5 x 16) 3237.200 3237.060
6 x 6 x .9 (148.5 x 148.5 x 24) 3238.200 3238.060
8 x 8 x .9 (204 x 204 x 24) 3239.200 3239.060
10 x 10 x .9 (255 x 255 x 25) 3240.200 3240.060
13 x 13 x .9 (323 x 323 x 25) 3243.200 3243.060$ 30.49 -
4597000 RITTAL PS4597 MOUNTING BRACKET (PK 4)
RITTAL 4597000
PS4597 MOUNTING BRACKET (PK 4)
Description
May be screw-fastened onto all enclosures and mounting parts with system punchings on a
25 mm pitch pattern.
Material Sheet steel
Surface finish Zinc-plated
Supply includes Assembly screws
Packs of 4 pc(s).
Weight/pack 0.34 kg$ 28.59 -
N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
N116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.$ 27.23 -
4568000 RITTAL Cabinet EYE BOLTS PK OF 4
RITTAL 4568000
PS4568 EYE BOLTS PK OF 4
Technical
Description For crane transportation of enclosures, where not already included in the supply.
Material Sheet steel
Surface finish Zinc-plated C 15 E
Supply includes 4 eyebolts M12
4 serrated lock washers A 12.5
To fit TS
SE
Thread Type: M12
Packs of 4 pc(s).
Weight/pack 0.61 kg
EAN 4028177103122
Customs tariff number 73181900$ 27.23 -
2469000 RITTAL SZ2469 KEY LOCKING PUSH BUTTON
RITTAL 2469000
SZ2469 KEY LOCKING PUSH BUTTON
Product description
Design:Push-button and lock insert
Note: Lock no. 2123; no other lock is possible.
Installation in handle
system: Push-button and lock insert
Comfort handle for semi-cylinder
Mini-comfort handle for semi-cylinder$ 20.69 -
2092200 RITTAL EL2092 M6 CAGE NUT PACK OF 50
RITTAL 2092200
EL2092 M6 CAGE NUT PACK OF 50
Description:
To fasten slide-in electronic equipment, 482.6 mm (19″) installed equipment and blanking
plates to profile rails. Used with profile plate thicknesses 0.8 – 2.0 mm. For narrow
tolerances,captive nuts for profile plate thicknesses 1.2 – 1.5 mm should be used. Either with
or without contacting the installed equipment with the 482.6 mm (19″) profile/housing.$ 18.51 -
2513000 RITTAL A3 Plastic Wiring Plan Pocket
RITTAL 2513000
Plastic wiring plan pocket
Product Description
Description For affixing on surfaces.
Material Halogen-free
Polystyrene with self-adhesive fastening strips.
Color Similar to RAL 7035
Suitable for paper size DIN A3 landscape format
Clearances Clearance height: 286 mm (11 “)
Clearance width: 438 mm (17 “)
Clearance depth: 45 mm (1.8 “)
Packaging unit 1 pc(s).
Weight/packaging unit 0.33 kg (0.7 lb.)
EAN 4028177025899
Customs tariff number 39269097
Product description (long) SZ Wiring plan pocket plastic DIN A3 landscape$ 17.57 -
TS 8611.180 RITTAL Lock Insert For Handle Systems
RITTAL TS 8611.180
Lock Insert For Handle Systems
Product description
Supply includes: with 2 keys
Product features
Installation in handle
system:
Comfort handle for lock inserts
Mini-comfort handle for lock inserts
Lock Insert: Security lock insert no. 3524 E
Packaging unit: 1 pc(s).
Weight/packaging unit: 0.04 kg (0.1 lb.)
Product description (long):
TS Lock insert for handle systems, lock-insert locking Nr. 3524 E$ 16.34 -
TS 8611.080 RITTAL Handle Adapter For Comfort Handle
RITTAL TS 8611.080
Handle Adapter For Comfort Handle
Product features
Packaging unit: 1 pc(s).
Weight/packaging
unit:
0.08 kg (0.2 lb.)
EAN: 4028177211933Product description
(long):
TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035$ 15.79