-
CCH-01U CORNING Closet Conn Housing, 1U (F/2 Panels)
CORNING CCH-01U
Closet Conn Housing, 1U (F/2 Panels)
DESCRIPTION
COO-MEXICO
Designed based on thousands of hours of customer
feedback, Corning Cable Systems Closet Connector
Housings (CCHs) offer more than two dozen innovative
features that make installation and troubleshooting of
fibre optic connectivity faster, easier and more cost effective.$ 239.61 -
CCH-CP24-A9 CORNING 24-fiber CCH panel with twelveDuplex LC singlemode adapters with ceramic inserts
CORNING CCH-CP24-A9
24-fiber CCH panel with twelve Duplex LC single-mode adapters with ceramic inserts
DESCRIPTION
COO-POLAND
Corning Cable Systems Closet Connector Housing Panels (CCH-CP) are offered in a variety of fiber counts for use with LANscape® Solutions hardware products for a “one-size-fits-all” approach.
$ 209.66 -
CCH-CS CORNING CCH Splice Cassete
CORNING CCH-CS
CCH Splice Cassete
DESCRIPTION
COO-MEXICO
Splice Protectors Type Heat-shrink
Splice Tray Capacity Single Fiber 24 Splices
Splice Tray Capacity Mass Fusion 6 Splices
Panel or Module Type CCH$ 100.20CCH-CS CORNING CCH Splice Cassete
$ 100.20 -
CCHE-CP24-04 CORNING CCHE-CP 12 LC Duplex SM
CORNING CCHE-CP24-04
CCHE-CP 12 LC Duplex SM
DESCRIPTION
COO-POLAND
The panels are used with field-installable connectors or
in applications where the pre-connectorised cables are
routed directly from the equipment to the piece of interconnect hardware. This provides an efficient way to securely mate two or more connectors.Adapter Type LC duplex
Fibre Count 24
Number of Adapters 12MOQ of 10 pcs are applicable
$ 186.52 -
DSCU02003AR OPTERNA Copper Structured Cabling, Cable, CAT6 U/UTP
OPTERNA DSCU02003AR
Copper Structured Cabling, Cable, CAT6 U/UTP
• Category 6A/class EA compliant
• Low flame-spread LSFH jacket material
• Compliant to ISO/IEC 11801 Ed 2.0, ANSI/TIA-
568-C.2, EN 50173-1,
• IEC 61156-5, EN 50288-10-1, IEC 60332-3-24,
IEC 60754-2, IEC 61034
• Reliable performance
• Super-standard performance marginApplications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signalling$ 149.76 -
FDBDCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37 -
FDBDCSX048 Opterna Indoor Wallmount fiber Distribution Box 48 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60 -
FDBSCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37 -
FDBSCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37 -
FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60 -
FPSLSCSX0241B Opterna 19″ Unloaded 1U Sliding Patchpanel 24 SC Simplex (LC Duplex) Port- Black
FPSLSCSX0241B Opterna
DESCRIPTION
The Opterna Fiber Optic 19” Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U and 4U height increments.
The sliding tray provides easy access to fiber cabling, making this panel ideal for ‘Pay as you Grow’ applications. The panel supports 24 way, 48 way and 96 way configurations in SC Simplex, SC Duplex, ST/FC (D cut out), LC Duplex (SC simplex foot print), LC Quad (SC Duplex foot print). Versions are available with MTP MPO cut-outs on the back for use with pre-terminated MTP/MPO trunks.
$ 57.18 -
SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
SCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.36