-
CCHE-CP24-04 CORNING CCHE-CP 12 LC Duplex SM
CORNING CCHE-CP24-04
CCHE-CP 12 LC Duplex SM
DESCRIPTION
COO-POLAND
The panels are used with field-installable connectors or
in applications where the pre-connectorised cables are
routed directly from the equipment to the piece of interconnect hardware. This provides an efficient way to securely mate two or more connectors.Adapter Type LC duplex
Fibre Count 24
Number of Adapters 12MOQ of 10 pcs are applicable
$ 186.52 -
CCH-CS CORNING CCH Splice Cassete
CORNING CCH-CS
CCH Splice Cassete
DESCRIPTION
COO-MEXICO
Splice Protectors Type Heat-shrink
Splice Tray Capacity Single Fiber 24 Splices
Splice Tray Capacity Mass Fusion 6 Splices
Panel or Module Type CCH$ 100.20CCH-CS CORNING CCH Splice Cassete
$ 100.20 -
CCH-01U CORNING Closet Conn Housing, 1U (F/2 Panels)
CORNING CCH-01U
Closet Conn Housing, 1U (F/2 Panels)
DESCRIPTION
COO-MEXICO
Designed based on thousands of hours of customer
feedback, Corning Cable Systems Closet Connector
Housings (CCHs) offer more than two dozen innovative
features that make installation and troubleshooting of
fibre optic connectivity faster, easier and more cost effective.$ 239.61 -
004TEY-13138A2G CORNING Central Tube Steel Armour Indoor/Outdoor Cable 4F G50 MMF OM2
CORNING 004TEY-13138A2G (1000 mtr)
Central Tube Steel Armour Indoor/Outdoor Cable 4F G50 MMF OM2
DESCRIPTION
Corning MPC (multi–purpose cable) central tube cables with corrugated steel armoring are flame–retardant,
indoor/outdoor cables designed for inter-building and intrabuilding backbones in duct, direct burial and riser applications.Cable type Central Tube
Product type Corrugated steel armour
Flame rating LSZH™/FRNC
Fibre Category 50 μm MM (OM2)$ 1,497.58 -
SRT3000RMXLI APC Smart-UPS SRT 3000VA RM 230V
APC SRT3000RMXLI
Smart-UPS SRT 3000VA RM 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
Interface Port(s) RJ-45 Serial, Smart-Slot, USB
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity$ 2,768.88 -
SRT192BP2 APC Smart-UPS SRT 192V 8kVA and 10kVA Battery Pack
APC SRT192BP2
Smart-UPS SRT 192V 8kVA and 10kVA Battery Pack
DESCRIPTION
Operating Temperature 0 – 40 °C
Operating Relative Humidity 0 – 95 (no %
Operating Elevation 0-3000meters
Storage Elevation 0-15000meters$ 1,163.75 -
SRT10KXLI APC Smart-UPS SRT 10000VA 230V
APC SRT10KXLI
Smart-UPS SRT 10000VA 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
• Includes: CD with software, Documentation CD, Installation guide, Temperature
Probe, USB cable, Warranty card, Web/SNMP Management CardBattery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leak-proof
Typical recharge time 1.5hour(s)
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)$ 6,222.02SRT10KXLI APC Smart-UPS SRT 10000VA 230V
$ 6,222.02 -
SRT10KRMXLI APC Smart-UPS SRT 10000VA RM 230V
APC SRT10KRMXLI
SMART-UPS SRT 10000VA RM 230V
DESCRIPTION
High density, double-conversion on-line power protection with scalable runtime
• Includes: CD with software, Documentation CD, Installation guide, Rack Mounting
brackets, Rack mounting hardware, Rack Mounting support rails, Temperature
Probe, USB cable, Warranty card, Web/SNMP Management Card$ 6,433.86 -
SURT48XLBP APC Smart-UPS RT 48V Battery Pack for Smart-UPS RT 1/2KVA
APC SURT48XLBP
Smart-UPS RT 48V Battery Pack for Smart-UPS RT 1/2KVA
DESCRIPTION
Output Voltage Distortion Less than 3%
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1Maximum Width 432MM, 43.2CM
Maximum Depth 483MM, 48.3CM
Rack Height 2U$ 615.10 -
SCSPCC6AUTP05MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 5mtr Grey
SCSPCC6AUTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 13.34 -
SCSPCC6AUTP03MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 3mtr Grey
SCSPCC6AUTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 7.90 -
SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
SCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 6.81