-
FBXLCUC11-MXF003 COMMSCOPE MULTIMODE LC-UC .9MM PIGTAIL
COMMSCOPE FBXLCUC11-MXF003
MULTIMODE LC-UC .9MM PIGTAIL
General Specifications
Color, connector A Beige
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Total Fibers, quantity 1$ 6.26 -
CPC3392-03F003 COMMSCOPE Cat6 Modular Patch Cord, 3FT
COMMSCOPE CPC3392-03F003
Cat6 Modular Patch Cord, 3FT
DESCRIPTION
ANSI/TIA Category 6
Cable Type U/UTP (unshielded)
Conductor Type Stranded
Jacket Color Dark gray
Pairs, quantity 4$ 6.26 -
309026 Datwyler Cat 6 ,RJ45 PC, 4m, UTP PVC Grey
309026 Datwyler Cat 6 ,RJ45 PC, 4m, UTP PVC Grey
DESCRIPTION
RJ45 patch cord, Cat.6 (up to 250 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends. Unshielded flexible cable U/UTP, 250 MHz, 4P, AWG 24. Cable sheath made of FR/PVC, also available as FRNC/LS0H. RJ45 plugs (8/8) Cat.6 in accordance with IEC 60603-7-4.
$ 6.32 -
341-1OS2S315 Norden SC APC Pigtail OS2 PVC 1.5m
Norden 341-1OS2S315 SCAPC Pigtail OS2 PVC 1.5m
MECHANICAL DATA
COMPLIANCE
ISO/IEC 11801
EN50173 -1,ANSI TIA/EIA 568B
FIBRE PIGTAIL
Fibre pigtails are used in permanent connections between patch
panels and incoming cables / single blown fibres. Pigtails are preconstructed
with connectors. Connector options include small form
factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are
based on 900μm tight buffered cores (600μm MT-RJ) and suitable for
internal use only inside suitable Fibre Management Systems
www.nordencommunication.com
Fibre System
Crush (N) 800
Impact (Nm) 0.2
Operating Temperature -10°C to +70°C
Installation temperature 0°C to +70°C
Temp – Installation 0°C to +70°C
Bend Radius 50mm (min)
Fibre Type Max. Attenuation
(dB/km)
850nm 1300nm 1310nm 1550nm
OM1 62.5/125μm ≤2.7 ≤0.6 – –
OM2 50/125μm ≤2.5 ≤0.7 – –
OM3 50/125μm ≤2.3 ≤0.6 – –
OM4 50/125μm ≤2.3 ≤0.6 – –
OS1 9/125μm – – ≤0.34 ≤0.20
OS2 9/125μm – – ≤0.34 ≤0.24
Min. Overfill Launch
Bandwidth
(Mhz•km)
Min. Gigabit Ethernet Link
Distance (m)
Gigabit 10Gigabit
850nm 1300nm 850nm 1300nm 850nm
≥200 ≥600 275 550 –
≥500 ≥500 550 550 –
≥1500 ≥500 1000 600 300
≥3500 ≥500 1000 600 550
– – – – –
– – – – –
OPTICAL PERFORMANCE DATA (CONNECTOR)
ORDERING INFORMATION
ORDERING GUIDE
www.nordencommunication.com
Fibre System
FIBRE PIGTAIL
Description Part Number
Singlemode OS2
SC/APC 1m PVC SC/APC OS2 PVC 1M PIGTAIL 341-1OS2S310
SC/APC 1.5m PVC SC/APC OS2 PVC 1.5M PIGTAIL 341-1OS2S315
SC/APC 2m PVC SC/APC OS2 PVC 2M PIGTAIL 341-1OS2S320
SC/APC 3m PVC SC/APC OS2 PVC 3M PIGTAIL 341-1OS2S330
SC/APC 1m LSZH SC/APC OS2 LSZH 1M PIGTAIL 342-1OS2S310
SC/APC 1.5m LSZH SC/APC OS2 LSZH 1.5M PIGTAIL 342-1OS2S315
SC/APC 2m LSZH SC/APC OS2 LSZH 2M PIGTAIL 342-1OS2S320
SC/APC 3m LSZH SC/APC OS2 LSZH 3M PIGTAIL 342-1OS2S330$ 6.81 -
N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
N116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 6.81 -
FBWLCUC11-JXF003 COMMSCOPE Singlemode LC-UC .9MM Pigtail
COMMSCOPE FBWLCUC11-JXF003
Singlemode LC-UC .9MM Pigtail
DESCRIPTION
Color, boot A Blue
Color, connector A Blue
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Jacket Color Yellow
Total Fibers, quantity 1$ 6.81 -
FBWSCUC11-JXF003 COMMSCOPE Singlemode SC-UC .9MM Pigtail
COMMSCOPE FBWSCUC11-JXF003
Singlemode SC-UC .9MM Pigtail
DESCRIPTION
Color, boot A Blue
Color, connector A Blue
Construction Type Pigtail, jacketed
Interface, Connector A SC/UPC
Jacket Color Yellow
Total Fibers, quantity 1$ 6.81 -
SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
SCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 6.81 -
N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
N116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 7.02 -
N11A.U1F010OK Nexans LANmark-6A Ultim UniBoot Patch Cords, 1 mtrs
N11A.U1F010OK Nexans
DESCRIPTION
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.$ 7.08$ 7.62 -
CPCSSZ2-03F003 COMMSCOPE Cat6a Modular Patch Cord, 3FT
COMMSCOPE CPCSSZ2-03F003
Cat6a Modular Patch Cord, 3FT
DESCRIPTION
ANSI/TIA Category 6A
Cable Type U/UTP (unshielded)
Conductor Type Solid$ 7.08 -
C6CPCU030-888BB LEVITON Cat6Plus 24 AWG U/UTP Stranded 4 Pair RJ45 Patch Cord Grey Cable with Grey Boots 3m
LEVITON C6CPCU030-888BB
Cat6Plus 24 AWG U/UTP Stranded 4 Pair RJ45 Patch Cord Grey Cable with Grey Boots 3m
DESCRIPTION
Low profile boots for higher density blade connectivity
Designed to have a repeatable, controlled and consistent assembly ensuring optimum performance
Flexible and robust construction
LSHF/LSZH materials as standard$ 7.08
