-
FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60 -
FFWLCLC42-JXF010 COMMSCOPE Singlemode LC-LC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFWLCLC42-JXF010
Singlemode LC-LC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Color, boot A Blue
Color, boot B Blue
Construction Type Duplex patch cord
Jacket Color Yellow
Total Fibers, quantity 2$ 27.23 -
FFWSCSC42-JXF010 COMMSCOPE Singlemode SC-SC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFWSCSC42-JXF010
Singlemode SC-SC 1.6MM Duplex Fiber Patchcord
DESCRIPTIO
Construction Type Duplex patch cord
Interface, Connector A SC/UPC
Interface, Connector B SC/UPC
Jacket Color Yellow
Polarity Method B
Total Fibers, quantity 2$ 27.23 -
FFXLCLC42-MXF010 COMMSCOPE Multimode LC-LC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFXLCLC42-MXF010
Multimode LC-LC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B LC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2$ 28.86 -
FFXLCLC42-MXF010 COMMSCOPE MULTIMODE LC-LC 1.6MM DUPLEX
COMMSCOPE FFXLCLC42-MXF010
MULTIMODE LC-LC 1.6MM DUPLEX
DESCRIPTION
Jacket Color Aqua
Total Fibers, quantity 2Cord Length, maximum 999 ft | 999 m
Cord Length, minimum 1 ft | 1 m
Ordering Note For lengths greater than 999 ft (304 m), orders must be in meters | Minimum length
may vary based on cable configurationConstruction Type Duplex patch cord
Interface, connector A LC
Interface Feature, connector A Standard
Interface, connector B LC$ 26.96 -
FFXLCSC42 COMMSCOPE OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex
COMMSCOPE
OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex, Low Smoke Zero Halogen (LSZH)
General Specifications
Color, boot A Aqua
Color, boot B Aqua
Color, connector A Beige
Color, connector B Beige
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B SC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2
Dimensions
Cable Assembly Length, minimum (ft) 2
Cable Assembly Length, maximum (ft) 325
Cable Assembly Length, minimum (m) 1
Cable Assembly Length, maximum (m) 99
Diameter Over Jacket 1.6 mm | 0.063 in$ 29.13 -
FFXSCSC42-MXF010 COMMSCOPE Multimode SC-SC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFXSCSC42-MXF010
Multimode SC-SC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Construction Type Duplex patch cord
Interface, connector A SC
Interface Feature, connector A Standard
Interface, connector B SC
Interface Feature, connector B Standard$ 28.86 -
FPSLSCSX0241B Opterna 19″ Unloaded 1U Sliding Patchpanel 24 SC Simplex (LC Duplex) Port- Black
FPSLSCSX0241B Opterna
DESCRIPTION
The Opterna Fiber Optic 19” Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U and 4U height increments.
The sliding tray provides easy access to fiber cabling, making this panel ideal for ‘Pay as you Grow’ applications. The panel supports 24 way, 48 way and 96 way configurations in SC Simplex, SC Duplex, ST/FC (D cut out), LC Duplex (SC simplex foot print), LC Quad (SC Duplex foot print). Versions are available with MTP MPO cut-outs on the back for use with pre-terminated MTP/MPO trunks.
$ 57.18 -
N102.105BK Nexans 1HU Patch Guide with Rings, Black
Nexans
Patch Guides, Blank Panels & Cable Management
· Patch guides to manage and store all patch cords.
· 1 HU and 2 HU for high density.
· 1 HU with rings for easy access.
· Cable guide for all patch panels without clip-on.$ 14.70 -
N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
N116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 6.81 -
N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
N116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 7.02 -
N116.P1A050OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 5m Orange.
N116.P1A050OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.$ 11.71
