-
D60.10865.PSOXX HES Patch Panel Data/Voice 1U 50port
HES D60.10865. PSOXX Patch Panel Data/Voice 1U 50port
Product Overview
50 way voice patch panels are in 1U high density format for greater voice integration than traditional patch panels. Designed to be utilised with any voice combination, of up to three pairs.
Features & Benefits
• Constructed from mild steel with a black finish
• Cat3 compatible
• 6 vertical IDC connectors per RJ45
• 110/LSA compatible IDC connectors
• Perforated cable strain relief for multi-pair cables
• 5 x 10 way circuit boards for modularity
• 19 rack mountable including fixing kit
• UK Manufactured
50 way voice patch panel | V001$ 99.38 -
FFXLCSC42 COMMSCOPE OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex
COMMSCOPE
OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex, Low Smoke Zero Halogen (LSZH)
General Specifications
Color, boot A Aqua
Color, boot B Aqua
Color, connector A Beige
Color, connector B Beige
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B SC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2
Dimensions
Cable Assembly Length, minimum (ft) 2
Cable Assembly Length, maximum (ft) 325
Cable Assembly Length, minimum (m) 1
Cable Assembly Length, maximum (m) 99
Diameter Over Jacket 1.6 mm | 0.063 in$ 29.13 -
MMCPNLX24SIJ2M-B LEVITON 1U SIJ Staggered Panel with Management Suitable for up to 24 Snap in Jacks Black
LEVITON MMCPNLX24SIJ2M-B
1U SIJ Staggered Panel with Management Suitable for up to 24 Snap in Jacks Black
DESCRIPTION
The 1RU 24-Port Modular Staggered Snap-in-Jack panel offers additional crosstalk performance in unshielded 10GPlus systems. Staggered design provides exceptional crosstalk performance in unshielded Category 6A systems. The 10GPlus system is classified as a Category 6A and Class EA product set that is fully backwards compatible to Cat 6 (Class E) and Cat 5e (Class D) products.
• Port orientation protects pin arrays from dust and enhances contact reliability
• Compatible with all standard 19 inch racks and cabinets$ 35.67 -
N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
N11A.U1F030OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.$ 9.53$ 10.07N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
$ 9.53$ 10.07 -
N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04 -
NPP-AL1BLK241 D-Link 24 Port Unloaded Patch Panel 1U Blank
D-Link NPP-AL1BLK241
24 Port Unloaded Patch Panel 1U Blank
DESCRIPTION
• With cable management bar for improved management
• Accepts Cat5E and Cat6 keystone jacks
• Mounts in standard 19” racks
• UL/RoHS certified$ 11.16 -
NPP-C61BLK241 D-Link 24 Port Cat6 Unshielded Fully Loaded Punch Down Patch Panel 1U- Black Colour
D-Link NPP-C61BLK241
24 Port Cat6 Unshielded Fully Loaded Punch Down Patch Panel 1U- Black Colour
DESCRIPTION
• Six Port RJ45 modules applied
• ID stripes for identifying port allocations
• IDC: suitable for 22-26 AWG stranded
and solid wire
• Compatible with both 110& Krone
punch down tools
• Improved Cable Management with
optional cable management bar$ 38.12 -
OPTRONICS OPPC-6-1-24-P
OPTRONICS OPPC-6-1-24-P
CAT6 UTP 1U 24 Port Panel Duel IDC -PCB Type
$ 30.49OPTRONICS OPPC-6-1-24-P
$ 30.49 -
OPTRONICS OPPC-XX-1-24-UL
OPTRONICS OPPC-XX-1-24-UL
Unloaded 1u KeyStone Panel Frame
$ 10.35OPTRONICS OPPC-XX-1-24-UL
$ 10.35 -
PUNDUIT NKFP24Y
PUNDUIT NKFP24Y
NK Modular Patch Panel, Flat, 24 Port, 1 RU
$ 15.52PUNDUIT NKFP24Y
$ 15.52 -
SCSJAC6UTPBK Opterna 180° Cat 6 Unshielded Keystone jack with T568A/B label, Black
SCSJAC6UTPBK Opterna
DESCRIPTION
Opterna category 6 unshielded jacks are designed and manufactured to meet and exceed the current and future requirements for high bandwidth and forms an essential element of the structured cabling system. The keystone jacks are highly reliable and offers optimal network performance. The jack forms part of the faceplate as well as part of the modular patch-panel. Clear wire retaining caps are supplied which provide additional cable strain relief. The keystone jacks are color-coded for both 568A and 568B standards and can be terminated using a standard 110 termination tool.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 2.99 -
SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
SCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 6.81
