-
SCSPCC6AUTP03MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 3mtr Grey
SCSPCC6AUTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 7.90 -
SCSPCC6AUTP05MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 5mtr Grey
SCSPCC6AUTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 13.34 -
SCSPCC6UTP02MLSZHGY Opterna Patch cord UTP, category 6, standard plug , LSZH 2 meter grey
SCSPCC6UTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSLStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 3.27 -
SCSPCC6UTP03MLSZHGY Opterna Patch cord UTP, category 6, standard plug , LSZH 3 meter grey
SCSPCC6UTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSLStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 3.81 -
SCSPCC6UTP05MLSZHGY Opterna Patch cord UTP, category 6, standard plug , LSZH 5 meter grey
SCSPCC6UTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSLStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 4.90 -
SCSPPU24UTP10G Opterna 19″ Modular 10G UTP Cat6A Patch Panel 24 ports, 1U, without modules, with rear cable management
SCSPPU24UTP10G Opterna
DESCRIPTION
Opterna snap-in type UTP patch panel is designed for customized connectors. Based on your design requirements, you can snap your preferred connectors in and make your own style patch panel.
The 10G patch panel has a staggered front port as well as staggered rear cable management to minimize alien crosstalk between jacks and cables and to achieve peak 10G performance.
The evenly designed patch panel provides an efficient and effective method of reducing alien crosstalk (AXT) from neighbouring connectors.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 22.87 -
SCSPPU48UTP Opterna 19” Modular UTP patch panel, 48 ports, 2U, without modules, with rear cable management
SCSPPU48UTP Opterna
DESCRIPTION
Opterna snap-in type UTP keystone patch panel are designed for customized connectors. Based on the installers specific design requirements, connector can be snapped into the panel. The UTP keystone patch panels are compatible for use with the category 5e and 6 keystone jacks and come as an unloaded panel. The patch panel is constructed of high quality plastic and metal back plate to provide the maximum strength and durability. The UTP keystone patch panel has an integrated rear cable management feature for cable routing and strain relief requirements. The rear cable management easily mounts at the back of the panel. The patch panel has an integrated label identification slot which allows the installer to design labels based on the project requirement making the panel TIA 606 compliant.
Applications
• Standard 19” rack compatible
• Suitable for UTP keystone jacks
• Height: 1U (24 ports), 2U (48 ports)Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class D/E
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 30.77 -
TL-PNC6-UT24M Techlogiks 24 Ports 01U 19Inch Fully Loaded Patch Panel with Rear Cable Management
Techlogiks
Category 6 Unshielded Patch Panel
Techlogiks Cat 6 modular patch panel utilizes quad frame modules offered with 8-contact inserts wired to Insulation Displacement Connectors (IDC}. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards.
Applications
- 10008ASE-T, 100BASE-Tx, 10BASE-T, 155M ATM, 4/16MB Token
- 100Mbps TP-PMD, /SON, ADSL, Analog & Digital Voice {VoIP)/
- Power over Ethernet (PoE}, Control Signal.
Standards
- Lead-free & RoHS2
- ANSl/TIA-568-C.2, ANSl/TIA- 1096-A {FCC Part 68}, /SO/IEC 11801 2nd edition and CENELEC EN 50173-1.
- Level A reliability requirements of /EC 60603-7-2 and /EC 60603-7-4 for
- Compatible for T568A and T5688 wiring
$ 77.60 -
TL-PNC6-UT48M TECHLOGIKS- 48 Ports 02U 19Inch Fully loaded Patch Panel with Rear Cable Management
TECHLOGIKS TL-PNC6-UT48M
48 Ports 02U 19Inch Fully loaded Patch Panel with Rear Cable Management
DESCRIPTION
Techlogiks Cat 6 modular patch panel utilizes quad frame modules offered with 8-contact inserts wired to Insulation Displacement Connectors (IDC}. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards.
$ 121.98 -
TL-PNC6UT24 TECHLOGIKS- 24 Ports 01U 19Inch Unloaded Patch Panel with Rear Cable Management
TECHLOGIKS TL-PNC6UT24
24 Ports 01U 19Inch Unloaded Patch Panel with Rear Cable Management
DESCRIPTION
Entire steel 24 ports UTP blank patch panel. UTP Cat.6 keystone jacks can be assembled on this panel.
The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.
Fitting for horizontal distribution in the equipment’s room and equipment’s connecting.$ 7.08 -
VOL-PPCB-F24K 3M 24 Port UTP patch Panel – Unloaded
3M VOL-PPCB-F24K
24 Port UTP patch Panel – Unloaded
DESCRIPTION
High density modular concept
• Fully shuttered presentation when loaded
• Direct and individual earthing connection upon insertion
of jacks (FTP and STP 360° shielded jacks)
• Total shielding on STP 360° shielded jacks$ 47.65